2024 Swiftfilters SS-1000 (H) Fluid Cleanliness Monitor Rental or Purchase

The SS-1000 package comprises of:

•      Integrated SS-1000 Fluid Cleanliness Monitor with sample hoses

•      External Limited Power Supply Unit

•      Mains power lead

•      SS-1000 Operating Instructions on USB Flash Drive

•      SS-1000 Quick Guide

•      Certificate of Conformity

•      Certificate of Calibration Verification

•      Packing note 

Environmental

Operating Temperature range:

+5°C to +40°C (41°F - 104°F)

Storage Temperature range

-20°C to 55°C ( -4°F to 131°F)

(Monitor drained of fluid):

Dust and water protection:

 IP65 (NEMA 4)

Relative Humidity:

 95%RH non-condensing

Maximum Altitude:

 3000m (9850 ft)

1.3    Fluid & Interface Connections

Inlet: M10 male fitted to 6mm OD straight adapter and cap - Green PU Hose.

Outlet: M10 male fitted to 6mm OD straight adapter and cap - Clear PU hose.

Communications:             USB-A 1 & 2 USB-B

Ethernet Cat5

Section 1: SS-1000 and SS-1000(H) Fluid Cleanliness Monitors Specification and Requirements

1.4    Fluid Sampling Environment

            Operating Pressure range:     0 to 1 Bar  (15 psi) maximum

            Operating Viscosity range:     1.5 to 450 Centistokes (30 to 2,200 SUS)

            Operating System /                 Mineral Oils                10°C - 80ºC (50°F - 176°F)

             Temperature:                          Water Glycols             10ºC - 60ºC (50°F - 140°F)

                                                                          Water Based Fluid     10ºC - 60ºC (50°F - 140°F)

                                                                          Fuels                          10ºC - 40ºC (50°F - 104°F)

Industrial Phosphate

                                                                          Esters & Polyesters   10ºC - 80ºC (50°F - 176°F)

The SS-1000 Fluid Cleanliness Monitor has been developed to provide accurate and continuous information on the cleanliness of aqueous solutions, hydraulic fluids and circulatory lubrication system fluids.  Fluid cleanliness levels monitored are then converted to the widely used cleanliness codes:

ISO4406, SAE AS4059 table 1 (NAS 1638),  AS4059 table 2 and GOST 17216-2001.

The resulting test data can be exported to USB Flash Drive, Printer, PC, PLC or network device.

The self-contained unit provides a portable monitor that can be used with a range of fluids, including mineral oils and aqueous solutions.  Fluid change procedures are included in this manual and these help to ensure the SS-1000 monitor is adequately flushed prior to testing on alternative fluid applications.

The contents of these operating instructions should be read before attempting any aspects of installation, operation or maintenance.